Costway AX10011 Mode D'emploi page 5

Check the battery level
Method 1:
After turning on, the
screen will display the
current battery level.
Method 2:
In charge setting
mode, press the
switch button to
display the current
remaining battery
percentage.
Note: If the battery level is below 20%, the quick start function will
not work properly. If the battery level falls below 20%, the display will
flash a "low battery" warning, Please charge your product
immediately. To maximize battery life, do not let the starter power
drop below 20%.
Emergency start function
1.Press the power
button to power on.
08
2.Ensure that the smart emergency starter cable is fully connected to
the 12V emergency start port.(The indicator light on the smart
emergency starter cable will flash, which is a normal phenomenon.
3.Firmly connect the positive and negative fixtures to the
corresponding battery terminals, as shown in the following figure.The
smart indicator will turn green.
(If the light continues to flash alternately red and green, make sure
the connection is correct.
Black Red
09