Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance overview
Appliance overview
Appliance overview
Appliance overview
1 1 1 1 Bottle racks
3 3 3 3 Cold sink cover
5 5 5 5 Feet
Delivery scope
Delivery scope
Delivery scope
Delivery scope
5x Bottle rack, 1x door handle incl.
mounting screws
Installation
Installation
Installation
Installation
Conditions for the installation location
Conditions for the installation location
Conditions for the installation location
Conditions for the installation location
Good ventilation is required around
•
the appliance, in order to dissipate the
heat properly and to guarantee effi-
cient cooling operation at low power
consumption. Sufficient clearance is
necessary.
Gap to the back and to the side
-
walls each approx. 10 cm;
Place the appliance so that the
-
appliance door can open without
being impeded.
2 2 2 2 Cold sink fan
4 4 4 4 Ventilation slots
Only install at a location with an am-
•
bient temperature suitable for the cli-
mate class of the appliance. For in-
formation on the climate class, please
refer to the "EU Product Data Sheet"
or to the rating label located in the in-
terior or on the rear side of the appli-
ance.
Place the appliance on a steady and
•
safe surface. If the appliance is not
horizontally leveled, adjust the feet
accordingly (one or two adjustable
feet depending on the model).
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
•
near heaters, next to a stove, di-
-
rect sunlight or any other heat
sources;
at locations with high humidity
-
(e.g. outdoors, bathroom), as
metal parts would be susceptible
to corrosion under such circum-
stances;
near volatile or flammable materi-
-
als (e.g. gas, fuel, alcohol, paint,
etc.), in rooms which may have
poor air circulation (e.g. garages).
Do not expose the appliance any
-
weather.
55