Publicité
Les langues disponibles
Les langues disponibles
3.3
Height Adjustable Armrests
The armrest height can easily be adjusted in order to
accommodate various residents. The armrest height
should be adjusted to provide correct arm support for
the resident as determined by the caregiver.
To Adjust the Armrest Height:
-
Squeeze the pins together which are located under the
armrest flap.
WARNING: DO NOT place fingers at the top of the
pins as this could cause pinching. Place fingers in the
concave shape of the pins.
-Raise or lower the arm to the desired height.
WARNING: DO NOT place fingers anywhere
underneath the arm while adjusting, as this could
cause pinching. Upon releasing the pins the armrest
height will lock into place.
Secure the outside flap on the side panel. Change the
height on the other arm as desired.
3.4
Transport Wheels
The Auto Locking Glider has two rear transport wheels
for ease of transporting the chair.
To Transport the Chair:
-Apply the caregiver lock.
-Standing directly behind the chair, tilt the chair back
onto the transport wheels and transport to the desired
location.
-Once the chair is in the desired location and in the
upright position, the caregiver lock may be released if
desired.
WARNING: Do not transport the chair while it is
occupied.
3.5
Accessories (Options)
We recommend Broda accessories for use only on Broda chairs. The correct installation of the Broda accessory is
very important. We recommend that the Broda chair is ordered with the required accessories already installed. Only
authorized caregivers who thoroughly understand the accessory installation procedures should attempt to install their
Broda accessories without assistance from their local Broda representative. Broda does not recommend use of other
manufacturer's accessories on Broda chairs.
10
!
2
1
Publicité
