Hilti C 4/12-50 Mode D'emploi page 14

To help ensure safe and reliable operation, use only genuine Hilti spare
parts, consumables and accessories. Spare parts, consumables and
accessories approved by Hilti for use with your product can be found
at your Hilti Store or online at: www.hilti.group
7 Transport and storage
Transport
▶ Do not transport this product with an accessory tool installed.
▶ Make sure that the equipment is held securely throughout all transport
operations.
▶ After transporting, always check all visible parts and controls for signs of
damage and make sure that they all function correctly.
Storage
▶ Always store this product with the electric supply cable unplugged from
the electricity supply.
▶ Store this product in a dry place, where it cannot be accessed by children
or unauthorized persons.
▶ After a long period of storage, always check all visible parts and controls
for signs of damage and make sure that they all function correctly.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to rectify the problem by yourself, contact Hilti Service.
Malfunction
LED 1 shows green,
LED 2 is off.
LED 1 flashes red,
LED 2 is off.
LED 1 and LED 2 are
off.
10 English
Possible cause
The battery may be de-
fective.
The battery is too hot
or too cold the battery
doesn't charge.
The charger is defective. ▶ Have the tool repaired
Action to be taken
▶ Remove the battery
from the charger. If
no LED shows on the
battery after activation
of the state of charge
indicator, the battery
is defective. Have the
battery checked by
Hilti Service.
▶ The charger switch-
es automatically to
charging mode as
soon as the battery
reaches the required
temperature.
by Hilti Service.
2373346
*2373346*