Publicité
Les langues disponibles
Les langues disponibles
3.4. LEVELLING THE WASHING MACHINE
EN
Warning!
■
The lock nuts on all four feet must be screwed tightly against the housing.
3.5. CONNECTING THE WASHING MACHINE
3.5.1. CONNECTING THE WATER SUPPLY HOSE
Warning!
■
To prevent leakage or water damage, follow the instructions in this chapter!
■
Do not kink, crush or modify water inlet hose.
■
Connect manually, do not use tools. Check if the connections are tight.
Connect the water supply hose to the water inlet valve and a water tap with cold water
as indicated.
3.5.2. DRAIN HOSE
Warning!
■
Do not bend or stretch the drain hose.
■
Position the drain hose properly, otherwise damage may be caused due to water
leakage.
There are two ways to position the end of the drain hose:
1.
Put it into the water trough.
Water
trough
Noted !
■
If the machine has drain hose support, please install it like the following.
1.
Check if the legs are securely attached to the
housing. If not, turn them to their original positions
and tighten the nuts.
2.
Loosen the lock nut and turn the foot until it is in
close contact with the floor.
3.
Adjust the legs and lock them with a spanner,
making sure that the machine is steady.
2.
Connect it to the branch drain pipe of
the trough.
12
Publicité
