Publicité
Les langues disponibles
Les langues disponibles
8. Loosen the rotating lock arms on the speaker by turning the arm screws on the front of the speaker
counterclockwise 1/2 to 1 turn, just enough to allow the lock arm to move freely (Figure 4).
•
Make sure the rotating lock arms are positioned inwards (Figure 5) so that your speaker fits into your cutout hole.
LOCK ARM
SCREWS TURN
COUNTER
CLOCKWISE
TO LOOSEN
(12 PLACES)
LOCK ARM
SCREWS TURN
COUNTER
CLOCKWISE
TO LOOSEN
(6 PLACES)
9.
Holding the speaker's front lip with your thumbs and index fingers,
carefully slip the speaker into the cutout and hold firmly in place.
(Figure 6).
Invisa SP/JPS_Manual_ENG_FR_12_14_23.indd 9
Invisa SP/JPS_Manual_ENG_FR_12_14_23.indd 9
SPS Figure 4
SPS Figure 5
JPS Figure 4
JPS Figure 5
Figure 6
GoldenEar Invisa SPS & JPS Manual
LOCK ARMS
TUCKED
IN PRIOR TO
INSTALLING
SPEAKER IN
WALL/CEILING
LOCK ARMS
TUCKED
IN PRIOR TO
INSTALLING
SPEAKER IN
WALL/CEILING
9
12/14/23 1:14 PM
12/14/23 1:14 PM
Publicité
