GoldenEar Invisa SPS Manuel Du Propriétaire page 11

Rotating Tweeter for Horizontal Installations
When installing the Invisa SPS horizontally,
as in a typical center channel application,
you must rotate the tweeter 90 degrees
for proper performance.
See Figure 8a.
For the JPS you must rotate both the
tweeter and faceplate 90 degrees.
See Figure 8b.
Setting the Invisa Speaker's High-Frequency EQ Control (HF EQ Switch)
We suggest starting with the HF EQ control (Figure 9) in the center position, in typical rooms with a balance
of reflecting and absorbing surfaces. If, however, your listening room is overly "bright" due to many reflective,
hard surfaces, select the "-" position to effectively compensate for this type of room acoustics issue. If, however,
your listening room is filled with heavy furniture and fabrics or you are sitting fairly far from the speakers, making
the sound "dull", select the "+" position to compensate for this type of room acoustics issue.
Invisa SP/JPS_Manual_ENG_FR_12_14_23.indd 11 Invisa SP/JPS_Manual_ENG_FR_12_14_23.indd 11
TWEETER CAN BE ROTATED BY
REMOVING SCREW (4 PLACES),
PULLING TWEETER ASSEMBLY OUT
SLIGHTLY, ROTATING IT 90º AND
SECURING IT IN PLACE AGAIN BY
REPLACING THE SCREWS.
TWEETER CAN BE ROTATED BY RE-
MOVING SCREW (4 PLACES), PULLING
TWEETER FACEPLATE & ASSEMBLY
OUT SLIGHTLY,
ROTATING TWEETER
PARTS 90º AND SECURING IT IN
PLACE AGAIN WITH THE SCREWS.
SPS Figure 8a
JPS Figure 8b
Figure 9
GoldenEar Invisa SPS & JPS Manual
11
12/14/23 1:14 PM 12/14/23 1:14 PM