Before Use; Operation; Basic Functions - Hilti PSA 100 Mode D'emploi

Masquer les pouces Voir aussi pour PSA 100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.6 Precautions for handling and using batteries
a) Keep the battery out of reach of children.
b) Remove the battery from the device if it is to remain
unused for some time.
c) Do not expose the battery to high temperatures
or fire. This may cause the battery to explode or
release toxic substances.
d) Under abusive conditions, liquid may be ejected from
the battery, Avoid contact. If contact accidentally
occurs, flush with water. In the event of the liquid

4 Before use

4.1 Inserting the battery pack and switching the tool on 2 3
1.
Insert the PSA 82 battery pack in the back of the tool.
2.
Fully charge the PSA 82 battery pack (please refer to the operating instructions for the PUA 81 mains adapter,
the PSA 82 battery pack and the PUA 82 charger for use in motor vehicles).
NOTE Alternatively, the PSA 82 battery pack can be removed from the PSA 100 monitor and charged using the
separately available PSA 85 charger.
3.
Switch the tool on by pressing the on/off button.
4.
You must accept the terms of the disclaimer notice displayed on the screen before the tool can be operated.
5.
To switch off, press and hold the on/off button for 3 seconds.
4.2 Settings
When operating a brand new tool you will first be requested to select the country-specific settings.
1.
Use the 4-way controller to select the desired language and confirm your choice by pressing the "OK" button.
2.
Make further settings using the 4-way controller and the "OK" button.
3.
Use the "OK" button to confirm the settings made.
NOTE You can also use the "Skip" button to skip making these settings until the next time the tool is switched
on.

5 Operation

5.1 Displaying the operating instructions
1.
Press the "Home" button for 5 seconds.
The operating instructions will be shown in the right context in the display. You can then browse through the
complete operating instructions.
2.
The operating instructions can also be displayed by way of the settings menu in the main menu by pressing the
Help function button.
3.
To close the operating instructions, press the Back function button.

5.2 Basic functions

The function buttons can be used to select the available functions.
The 4-way controller can be used to shift the focus, change parameter values or, depending on the setting, shift the
cross hairs or change the layer thickness/depth, etc.
The Ok confirmation button can be used to select the object in focus or to start data processing.
coming into contact with the eyes, rinse the eyes
with plenty of water and consult a doctor. Liquid
ejected from the battery may cause irritation or burns.
e) Use only the battery chargers recommended by
the manufacturer to charge the batteries. Use of a
charger with batteries other than the specific type(s)
for which it is designed presents a risk of fire.
f)
Observe the special instructions applicable to the
transport, storage and use of Li-ion batteries.
g) Do not use damaged batteries.
en
3

Publicité

Table des Matières
loading

Table des Matières