Eaton DB4B Manuel Technique page 13

Conditions of safe use
The following conditions apply to the installation, operation and maintenance of the assessed equipment. Failure to
observe these may compromise the safety integrity of the assessed equipment:
1. The user shall comply with the requirements given in the manufacturer's user documentation (This Safety Manual and
Technical manual) in regard to all relevant functional safety aspects such as application of use, installation, operation,
maintenance, proof tests, maximum ratings, environmental conditions, repair, etc;
2. Selection of this equipment for use in safety functions and the installation, configuration, overall validation,
maintenance and repair shall only be carried out by competent personnel, observing all the manufacturer's conditions
and recommendations in the user documentation.
3. All information associated with any field failures of this product should be collected under a dependability
management process (e.g., IEC 60300-3-2) and reported to the manufacturer.
4. The unit should be tested at regular intervals to identify any malfunctions; in accordance with this safety manual
5. If the product is used in a redundant installation, both hardware safety integrity and systematic safety integrity for
SIL 2 can be achieved. The installation must be such as to ensure sufficient protection against common cause failures
and independence from cascading failures..
Loudspeaker - dB4B TM252 November 2023 www.eaton.com
Loudspeaker - DB4B
English
9