BTI profiline -SH 11 E Notice Originale page 21

Technical Data
Demolition Hammer
Art. No.
Rated power input
Impact rate
Impact energy per stroke
Chisel positions
Chiselling capacity in
concrete of medium hard-
ness
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring (Vario-Lock)
4 On/Off switch
5 Thumbwheel for preselection of impact rate
6 Service indicator
7 Auxiliary handle
8 Knurled nut for auxiliary handle
The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 89 dB(A); Guaranteed
sound power level lower than 105 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Chiselling: Vibration emission value a
2
Uncertainty K=2 m/s .
1 619 929 839 • 31.3.08
BTI-SH 11 E
015860
W 1500
bpm 900 – 1890
J 6 – 25
12
kg/h 490
SDS-max
Central permanent
lubrication
kg 10.1
/II
=16 m/s
h
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organ-
isation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the prod-
uct described under "Technical Data" is in conformity
with the following standards or standardization docu-
ments: EN 60745 according to the provisions of the
directives 2004/108/EC,
28 Dec 2009), 2006/42/EC (from 29 Dec 2009),
2000/14/EC.
2000/14/EC:
100 dB(A). Conformity assessment procedure accord-
ing to Annex VI.
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Jürgen Dietz
General Manager
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
2
,
98/37/EC
Measured sound
i. V. Günter Hub
Purchasing Manager
(until
power level
English | 21