Philips GC4800 Serie Mode D'emploi page 21

Problem Possible cause
You have put an
additive in the
water tank.
The set
temperature is
too low for steam
ironing.
You have used
the steam boost
function at a
temperature setting
below 3.
Water drips You have put the
from the iron in horizontal
soleplate position with water
after the still left in the water
iron has tank.
cooled
down or has
been stored.
Flakes and Hard water forms
impurities flakes inside the
come out of soleplate.
the soleplate
during
ironing.
Solution
Rinse the water tank and do not
put any additive in the water tank.
Set a temperature of or 2
higher.
Set the temperature dial to a
setting between 3 and MAX.
Empty the water tank.
Use the Calc-Clean function
one or more times (see chapter
'Cleaning and maintenance',
section 'Using the Calc-Clean
function').
EnGlish
21