Publicité
Les langues disponibles
Les langues disponibles
CARE & MAINTENANCE
CLEANING
Ensure the appliance is unplugged before cleaning.
• To clean the inside of the appliance, use a soft
cloth and a solution of a tablespoon of baking
soda to one quart of water or a mild soap
solution or some mild detergent.
• Wash removable shelves in a mild detergent
solution, then dry and wipe with a soft cloth.
• Clean the outside with a soft, damp cloth and
some mild detergent.
• It is important to keep the area clean where the
door seals against the cabinet. Clean this area
with a soapy cloth. Rinse with a damp cloth and
let dry.
Note: Do not use cleaners containing ammonia or
alcohol on the appliance. Ammonia or alcohol can
damage the appearance of the appliance. Never
use any commercial or abrasive cleaners or sharp
objects on any part of the appliance.
POWER FAILURE
Most power failures are corrected within a few
hours and should not affect the temperature of your
appliance if you minimize the number of times the
door is opened. If the power is going to be off for
a longer period of time, take the proper steps to
protect your contents.
Note: Wait 3 to 5 minutes before attempting
to restart the refrigerator if operation has been
interrupted.
VACATION
• Short vacations: Leave the appliance operating
during vacations of less than three weeks.
• Long vacations: If the appliance will not be used
for several months, remove all items and turn
off the appliance. Clean and dry the interior
thoroughly. To prevent odor and mold growth,
leave the door open slightly, blocking it open if
necessary.
MOVING
• Make sure the appliance is empty.
• Secure the shelves with tape.
• Secure the door with tape.
• Turn the adjustable foot up to the base to avoid
damage.
• Protect the outside of the appliance with a
blanket or similar item.
• Be sure the appliance stays in the upright
position during transportation.
• If the appliance is placed on its back or side
during transportation, upon reaching the
destination, allow it to remain upright for 6
hours before plugging in to avoid damage to
internal components..
DEFROSTING INSTRUCTIONS
This appliance is equipped with a manual defrost
system. Defrosting should be activated any time the
ice build up inside the freezer compartment reaches
6 mm (1/4") thick.
• Remove all food from the appliance.
• Unplug the appliance and leave it unplugged
until all ice has melted.
• Remember to protect your fl oors or counters
during the defrosting process by putting towels
or a pan under the appliance in case of leaking.
• Leaving the refrigerator door partially open can
help the defrosting process. You must remember
to close the door before plugging the appliance
back in.
• Ensure that the drip tray is under the evaporator
to collect melted water.
Important: Never use sharp or pointed instruments
to remove ice from the freezer compartment. The
freezer compartment contains refrigerated gas
lines. If these lines are accidentally pierced it
will render the refrigerator inoperable and void
the manufacturer's warranty. Do not allow the
refrigerator to continue operation if the freezer
compartment is pierced.
DISPOSAL
This appliance may not be treated as regular
household waste, it should be taken to the
appropriate waste collection point for recycling
of electrical components. For information on local
waste collection points, contact your local waste
removal agency or government offi ce.
5
Publicité
