Danby DIPLOMAT DCR017B1WM Manuel Du Propriétaire page 5

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the upper hinge cover and the upper
hinge from the top right side of the cabinet.
Remove the screw hole cover from the top left
side of the cabinet.
2. Remove the hinge hole cover from the top left
side of the door and install it on the top right
hand side of the door. Remove the door from the
cabinet.
3. Remove the adjustable foot from the bottom left
side of the cabinet. Remove the lower hinge
from the bottom right side of the cabinet.
4. Unscrew the hinge pin and remove it from the
hinge.
5. Flip over the lower hinge.
6. Reinstall the hinge pin.
7. Install the lower hinge on the bottom left side
of the cabinet. Install the adjustable foot on the
lower right side of the cabinet. Install the door
on the cabinet.
8. Install the upper hinge on the top left side of the
cabinet. Install the screw hole cover on the top
right side of the cabinet.
Note: Ensure that the top of the door is level with
the top of the cabinet and that the rubber gasket
is making a good seal with the cabinet all the way
around before tightening the screws on the upper
hinge.
1
2
3
4
5
6
7
4
8