Publicité
Les langues disponibles
Les langues disponibles
MALONE
Loading
NOTE: Bike frames vary is size, shape and construction. These are general guide lines for loading
and securing. You may need to adjust these steps to best suite your bikes configuration. *Use of
center arm on frame or front wheel may or may not be applicable depending on bike.
● First, loosen the hand knobs, remove and install the loading ramp at the rear of the carrier and
trailer.
● Align the bike to the ramp and roll it up and forward onto the trailer. The front wheel should rest upon
the wheel stop when fully loaded.
● * Holding tight and tilting the bike allows the center arm to be raised over the center tube of the bike.
Lower the hook and locking knob over the center tube or front wheel on carbon frames.
● Use the provided keys and lock the hand knob.
2
MPG2102
R
Publicité
