ETNA KCV178NZWA Mode D'emploi page 47

INSTALLATION AND CONNECTION
Changing the side on which the door opens
Tools
Switch off the appliance and disconnect it from the mains.
1. Remove all door compartments and close the door.
2. Remove the cover plates, the screws and the upper hinge.
3. Carefully lift the top door from the middle hinge and place it on a padded surface to prevent
scratching.
4. Unscrew parts 'S1' and 'S2' and attach 'S2' and 'S3' (included) to the other side with the
screws.
Part S3
EN 15