Description Of The Symbols; Intended Use - Ayce PLD2372 Manuel D'utilisation

IMPORTANT INFORMATION
WARNING
At any time and without prior notice Ayce Power tool reserves the right to change and
improve the design and the technical speci cations of this product.

INTENDED USE

The appliance is intended for melting down plastic or glue, cleaning paint, heating or
ice-out tubes.

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks. The
safety symbols and the explanations that accompany them must be perfectly understood. The
warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
This symbol, marking a point of safety, indicates a caution,
warning or danger. Ignoring this warning can result in an
accident to yourself or others. To limit the risks of injury, re
or electrocution, always follow the recommendations
indicated.
Before any use, refer to the corresponding section in this
user manual.
These symbols indicates the requirement of wearing ear
protection, eye protection, respirator and gloves when
using the product.
Conform to CE safety standards.
Class II machine – Double insulation
The crossed-out wheeled bin symbol indicates that the
item should be disposed of separately from household
waste. The item should be handed in for recycling in
accordance with local environmental regulations for
waste disposal. By separating a marked item from household
waste, you will help reduce the volume of waste sent to
incinerators or land- ll and minimize any potential negative
impact on human health and the environment.
Proven safety of the Federal Inspectorate for Heavy
Current Installations ESTI
| 70 GB
69