Publicité
Les langues disponibles
Les langues disponibles
12
OPERATION
WARNING
Do not handle battery pack, switch, or machine with wet
hands. Do not expose to rain or allow liquid to enter the
motor compartment.
12.1
EXAMINE THE CHAIN OIL
NOTE
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add the oil if it is necessary.
12.2
START THE MACHINE
2
1. Pull the lock-out button (2) with your thumb backward.
2. Press the trigger (1) at the same time.
12.3
STOP THE MACHINE
1. Release the trigger to stop the machine.
12.4
DELIMBING A TREE
B
A
English
1
Make sure that there is nothing or nobody in the area where
the branches fall.
•
Stand opposite the branch you will cut.
•
Start to cut the higher branches.
•
Then cut the lower branches.
•
Cut downwards to prevent the bar from jamming.
12.5
LIMB TREE BRANCHES
Limbing is to remove the branches from a fallen tree.
A
1. Keep the larger lower branches to hold the log off the
ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to up.
4. Keep the larger lower branches as a support until the log
is limbed.
12.6
ADJUST THE TRIMMER HEAD
ANGLE
-30º
0º
The trimmer head can be locked into 7 positions.
1. Pull the pivot button and move the head forward or
backward to your desired position.
2. Release the pivot button.
11
WARNING
A
75º
EN
Publicité
