ABUS Security-Center TV7210 Manuel D'installation page 116

(r/w) 1
2
3
4
sendclientaudio 0
(r/w)
1
source (r/w) 0
1
lowbandwidth 0
(r/w)
1
enableaec (r/w) 0
1
Group: Image
NAME VALUE
brightness <-5 ~ 5>
(r/w)
saturation <-5 ~ 5>
(r/w)
contrast <-5 ~ 5>
(r/w)
hue <-5 ~ 5>
(r/w)
mode Preview
(w)
Restore
Save
Group: CCD
NAME
irismode
(r/w)
irislevel
(r/w)
autoelectronicshutter
(r/w)
enableblc
(r/w)
enableagc
(r/w)
flickless
(r/w)
update
(w)
mode
(w)
All manuals and user guides at all-guides.com
Half-duplex (Talk or Listen, not at the same time)
Simplex – Talk only
Simplex – Listen only
Disable audio
Do not send audio from active client to all other
clients
Send audio from active client to all other clients (only
possible in Half-duplex)
Use external microphone in
Use build microphone
Disable low bandwidth environment support
Improve in low bandwidth environment
Disable
Enable
VALUE
Video
DC
<1 ~ 8>
0
1
0
1
0
1
0
1
1
Preview
Restore
Save
53
DESCRIPTION
Adjust brightness of image according to mode
settings. <0>
Adjust saturation of image according to mode
settings. <0>
Adjust contrast of image according to mode
settings. <0>
Adjust hue of image according to mode settings.
<0>
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters
DESCRIPTION
Video Iris
DC Iris
Iris level when connect to auto iris lens. 1 =>
most brightness, 8 => most darkness <1>
Turn off AES
Turn on AES
Turn off backlight compensation
Turn on backlight compensation
Set auto gain control to normal level
Set auto gain control to MAX level
Turn off flickless
Turn on flickless (1/100 NTSC, 1/120 PAL)
Update the above settings
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters