Franke 7612982000553 Notice De Montage Et De Mise En Service page 4

2. Abbreviations and terminology
DN
FAR Order No.
EA No.
Conversion
All length specifications in the graphics are in mm.
3. Important notes
• Installation, commissioning and maintenance are to be performed only by a
qualified technician according to the instructions provided.
• Legal requirements and the technical connection regulations of the local water
supply companies must be complied with.
• Before assembling and installing the equipment, flush the supply pipes in
accordance with DIN 1988!
• Use suitable cleaning agents that are not harmful to the fittings in a proper manner
and rinse with water after use. High-pressure cleaners must not be used for
cleaning.
• All rights reserved to make technical alterations.
4. Technical specifications
Nominal diameter:
Minimum flow pressure:
Calculation flow rate:
Volumetric flow:
Flow time at 38°C:
2000065943, 200065944
2000103746
4
Nominal diameter in mm
Franke-AQUAROTTER Order No.
European article number
1 mm = 0.03937 inches
1 inch = 25.4 mm
DN 15
1.0 bar
0.20 l/s
0.40 l/s (24 l/min) at 3 bar flow pressure
1 – 50 s adjustable
10 – 25 s adjustable
(with shower head, 0.20 l/s at 3 bar flow
pressure)
info@hygiene-shop.eu - www.hygiene-shop.eu