Siemens MQ950 Serie Mode D'emploi page 10

en Overview
These operating instructions refer to various
models.
Overview
X Fig. A
Base unit
1 Ejector button
For removing the tools
2 Switch + fast and continuous
operation
(for some models)
For switching the appliance on and off
and adjusting the operating speed.
P = switched off
min/1 = slowest speed
max/4 = fastest speed
M = Instantaneous switching
(maximum speed)
press to the left and hold in place
3 Power cord
4 Apertures for inserting the tools
Tools
5 Stirrer
6 Kneading hook
Some models:
7 Universal cutter
(separate operating instructions)
If the universal cutter is not included, it can
be ordered from customer service (order
no. 642828).
Operation
Base unit with tools
An especially good result is achieved if the
tools are used for the following applications:
Stirrers
for Sauces, beaten egg white, mashed
potatoes, crème fraîche, mayonnaise,
cream and light dough, e.g. cake mixture.
Stirrers are not suitable for processing
heavy dough.
10
MQ950_EU_8001171736.indb 10
All manuals and user guides at all-guides.com
Kneading hook
for stiff mixtures such as short pastry, yeast
dough and potato dough as well as for
mixing heavy mincemeat dough, pasta or
bread dough.
The maximum processing quantity is
500 g of flour and ingredients.
W Risk of injury from rotating drive!
Never grip the rotating tools. Do not attach
or remove tools until the appliance is at a
standstill – when switched off, the appliance
continues running briefly.
Protect long hair or loose items of clothing
to prevent them from becoming caught in
the rotating tools.
■ Before using the appliance for the first
time, clean base unit and tools.
X Fig. B
■ Completely unwind the power cord.
■ Place the required tool on the base unit
and depress until it locks into position.
Note the shape of the plastic
parts to prevent mixing them up
(see Fig. B-1)!
■ Insert the mains plug.
■ Place the food in a suitable receptacle.
■ Insert tools into the receptacle and
switch on the appliance at the required
setting.
Settings min/1, 2:
for working in and mixing in.
Settings max/3, 4:
for kneading and beating.
■ After working, set the switch to P
and release and remove the tools with
the ejector button.
Attention:
The ejector button cannot be actuated
unless the switch is in the P position.
Note:
Always switch off the base unit before
taking it out of the blended food.
16.09.2019 15:39:51