TechniSat 0100/9498 Mode D'emploi page 26

11 Central scene command class
The TechniSat series switch can also be used as a scene switch.
In the default configuration (page 19, parameter 1), the series switch sends
Z-Wave command class central scene trigger notifications to the primary
Z-Wave controller when push-button positions T1, T2, T3 or T4 are pressed
multiple times.
When the respective push-button position is pressed multiple times, the
following trigger notifications are sent:
Push-button
position
triggered scene
number
The following push-button attributes are used for all scene numbers in trigger
notification:
Push-button position (T1 / T2
/ T3 / T4) pressed
twice
three times
four times
five times
26
T1 T2 T2
1 2 3
Z-Wave push-button attribute
Push-button pressed twice
Push-button pressed three times
Push-button pressed four times
Push-button pressed five times
T4
4