DeWalt XR DCS356NT Traduction De La Notice D'instructions Originale page 30

EngLIsh
CORDLESS OSCILLATING MULTI‑TOOL
DCS355, DCS356
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Oscillating frequency
Oscillating angle
Speed 1
Speed 2
Speed 3
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑4:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
28
WALT one of the
e
DCS355 DCS356
V 18 18
DC
1/2/10/11 1/2
Li‑Ion Li‑Ion
min‑ 1 0–20000 0–20000
1.6˚ 1.6˚
min‑ 1 ‑ 15000
min‑ 1 ‑ 17000
min‑ 1 ‑ 20000
kg 1.1 1.1
dB(A) 86 86
dB(A) 97 97
dB(A) 3
m/s 2 12.4 12.4
m/s 2 1.5 1.5
EC‑Declaration of Conformity
Machinery Directive
Cordless Oscillating Multi‑Tool
DCS355, DCS356
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN62841‑1:2015+AC:2015, EN62841‑2‑4:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
26.08.2021
3
WALT at
e
WALT.
e