Sunex Tools SX0918T Mode D'emploi

Operating Instructions • Warning Information • Parts Break down
SPECIFICATIONS
Rivet Capacity ................................... 3/16"
Traction Power.............................1,983 lbf.
Stroke Length .................................. 11/16"
Air Inlet .........................................1/4" NPT
Air Supply Hose Size .................... 3/8" I.D.
Working Air
Pressure ......................75-90 psig (6.2 bar)
Height ..............................................12-3/8"
Weight ...............................................3.9 lb.
ALWAYS READ THIS MANUAL BEFORE OPERATING TOOL
ALWAYS WEAR EYE PROTECTION (USERS AND
BYSTANDERS) WHEN OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING PROTECTION WHEN OPERATING
THIS TOOL (USERS AND BYSTANDERS)
ALWAYS WEAR FACE PROTECTION WHEN OPERATING THIS
TOOL (USERS AND BYSTANDERS)
AVOID PROLONGED EXPOSURE TO VIBRATION
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
SX0918T: Parts Breakdown & Operating Manual
WARNING
WARNING
3/16" HEAVY DUTY RIVET GUN
SX0918T
© Copyright 2016, Sunex Tools
Rev. 11/7/16
®