Sunex Tools SX281 Mode D'emploi

Operating Instructions • Warning Information • Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Punch Hole Size . . . . . . . . 3/16" (5mm) & 5/16" (8mm)
Capacity (Steel or Aluminum) . . . . . . . . . . . . . . . . 2.0mm
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Hose Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8" I.D.
Recommended Air Pressure. . . . . . . . . . . . . . . . . . 90 PSI
SX281
SX281_manual_111505.indd 1
SPECIFICATIONS
Average Air Consumption . . . . .0.25 CFM (60 cycles/min)
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10" (255mm)
Net Weight (Tool) . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Lbs.
Net Weight (Kit) . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 Lbs.
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SX281
3/16" & 5/16"
D H
UAL EAD
P /F
UNCH LANGE
T
OOL
11/15/05
11/15/05 11:48:49 AM