HAMPTON BAY HB7203P-98 Guide D'utilisation Et D'entretien page 6

Installation (continued)
3
Mounting the fixture
NOTE: Use a non-drying exterior caulking
material such as a clear silicone rubber sealant
for exterior use.

Place the back plate of the fixture body (A)
onto the fixture screws (FF) and secure it
into place by using the lock nuts (BB)
provided.

Caulk the upper 2/3
the fixture body (A).

Leave the bottom 1/3
drainage of any water that may leak into
the enclosure.
4
Assembling the fixture
NOTE: Do not exceed a 60 watt incandescent
light bulb or a 13 watt SBCFL.

Install up to a 60 watt light bulb or a Listed
SBCFL (self-ballasted compact fluorescent
lamp equivalent [not provided]) in the
socket of the main fixture body (A).

Attach the hood (B) to the main fixture
body (A) using the provided hood nuts
(AA).

Thread the finial (C) or the tail (D) to the
bottom of the main fixture body (A).
rds
of the back plate on
rd
un-caulked for
AA
FF
6
A
B
A
C
D