HAMPTON BAY HB7203P-98 Guide D'utilisation Et D'entretien page 5

Installation
1
Mounting the hardware

Thread the fixture screws (FF) into the
provided holes of the mounting bracket
(GG) as shown.

Thread the hex nuts (CC) onto the fixture
screws (FF), as shown. Do not tighten the
hex nuts (CC) at this time.

Pull the power supply wires out from the
outlet box, and mount the mounting
bracket (GG) to the outlet box, using the
mounting screws (EE).
2
Connecting the wires
NOTE: If you have electrical questions, consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (DD).

Connect The white supply wire to the white
fixture wire using a wire nut (DD).

Connect the fixture ground wire and the
supply ground wire together using a wire
nut (DD).

Wrap all wire connections with electrical
tape for a more secure connection.
EE
FF
CC
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
GG
GG
DD
HAMPTONBAY.COM