Wolf BWL-1SB-07 Notice De Montage page 46

BWL-1S-10/14 outdoor module
Remove the cover, two discharge grilles,
right side casing and control unit cover prior
to installing the condensate pan heater.
Bild 2
Bild 3
1
08.12.17
A10
CATIAV5R24SP5
C
A Aperture for condensate drain pipe
(Please note: Do not obstruct the aperture in the condensate pan)
B
Overflow outlet
Please note: Do not obstruct overflow outlet B.
C Adhesive cable mounting
Note on 1:
Use cable ties to fix the drain heater.
Note on 2:
Route the heated area of the drain heater as close as possible to apertures A and B on the floor of the condensate
pan.
To do this, fix the drain heater to the floor at three points with adhesive cable mountings.
46
GB
BWL-1S-10/14 outdoor module
1
2
Vorlage 3
1:6
. 78,132
Ablaufheizung Kondensatwanne
BWL-1S-10/14
V.0000390725
1
2
1
B A
Bild 1
3064055_201802