ARENDO 20191101NB084 Mode D'emploi page 16

another location.
• Remove the power plug from the sock-
et when the device is not in operation,
as well as during cleaning and assem-
bly.
• If the power cord is damaged, this
must be replaced by the manufacturer
or by a qualified person in the event of
a defect, in order to prevent damage.
• Never insert body parts, or objects
which are not defined for it, in the
blender.
• If the blade unit is blocked and does
not move, always disconnect the plug
from the socket before removing the
objects that are blocking the blade.
• The appliance is intended for personal
use only.
• Switch off the appliance and discon-
nect the plug if you want to remove
16
English