Télécharger Imprimer la page

Palram CANOPIA Palermo 10x10/3x3 Instructions De Montage page 4

Publicité

EN
INFORMATION
SAFETY ADVICE
Dispose of all plastic bags safely – keep them away from children's reach.
• •
Keep children away from the assembly area.
When using a stepladder or power tools, make sure that you are following the manufacturer's safety advice.
• •
IMPORTANT RECOMMENDATIONS
These instructions are compatible with Palram Canopia's
Palermo 10x10 / 3x3 | 11x11 / 3.5x3.5 | 12x12 / 3.6x3.6 | Milano 10x10 / 3x3 | Martinique 10x12 / 3x3.6.
• •
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
• •
BEFORE ASSEMBLY
This curtain / netting set includes 4 parts that cover the entire gazebo.
1.
2.
Please read these instructions carefully before you start to assemble this product.
3.
Some of the steps may require the assistance of a second person.
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly, please refer
to the relevant assembly step for important additional comments.
In order to assemble the curtain / netting you will need to use part #7829.
This part is supplied with the gazebo.
If the part was not inserted while the gazebo was assembled please refer back
to the Palermo / Milano / Martinique Garden Gazebo Assembly Instructions.
7829
(You can download the assembly instructions from our website:
www.canopia.com)
Step 3:
(Palermo 10x10 / 3x3 | Milano 10x10 / 3x3) Adjust the curtain / netting
to the appropriate size.
Step 4:
(Martinique 10x12 / 3x3.6) Adjust the curtain / netting to the appropriate size.
When closed, the curtain / netting has to be stretched in order to properly
• •
maintain them.
When opened, the curtain / netting should be tied to the poles with the
• •
built-in straps
Optional:
It is possible to thread a curtain weight chain at the bottom.
.
FR
INFORMATIONS
CONSEILS DE SECURITE
Jetez précautionneusement tous les sacs plastiques – tenez-les hors de portée des enfants.
• •
Tenez les enfants à distance de la zone de montage.
Si vous utilisez un escabeau ou des outils électriques, assurez-vous de respecter les consignes de sécurité
• •
du fabricant.
RECOMMANDATIONS IMPORTANTES
Ces instructions ne sont compatibles qu'avec le Gazebo du jardin Palram Canopia's
Palermo 10x10 / 3x3 | 11x11 / 3.5x3.5 | 12x12 / 3.6x3.6 | Milano 10x10 / 3x3 | Martinique 10x12 / 3x3.6.
• •
Veuillez suivre les étapes dans l'ordre indiqué dans ces instructions.
Conservez ces instructions en lieu sûr pour référence ultérieure.
• •
AVANT LE MONTAGE
Cet ensemble de rideaux / filets est composé de 4 parties et couvre la totalité du gazebo.
1.
2.
Veuillez lire attentivement ces instructions avant de commencer l'assemblage de ce produit.
3.
Certaines étapes nécessitent l'aide d'une deuxième personne.
PRINCIPALES ÉTAPES D'ASSEMBLAGE
Lorsque vous rencontrez cette icône d'information pendant l'assemblage, veuillez vous
référer à l'étape d'assemblage correspondante pour d'autres commentaires importants.
Pour assembler le rideaux / filet, vous aurez besoin d'utiliser la partie #7829.
Cette partie est fournie avec le gazebo. Si la partie n'a pas été insérée alors
que le gazebo a été assemblé, veuillez vous référer aux instructions
d'assemblement du Palermo / Milano / Martinique Jardin Gazebo.
7829
(Vous pouvez télécharger les instructions de montage sur notre site Web :
www.canopia.com)
Étape 3:
(Palermo 10x10 / 3x3 | Milano 10x10 / 3x3) Ajuster les rideaux / filets à la
taille appropriée.
Étape 4:
(Martinique 10x12 / 3x3.6) Ajuster les rideaux / filets à la taille appropriée.
Veuillez garder les rideaux / filets tendu si vous souhaitez les fermer.
• •
Une fois que vous aurez ouvert les rideaux / filets, vous devez les attacher
• •
aux cannes avec les sangles intégrées.
Facultatif:
il est toutefois possible d'enfiler une série de poids du rideau à la partie inférieure.

Publicité

loading

Ce manuel est également adapté pour:

Canopia palermo 11x11/3.5x3.5Canopia palermo 12x12/3.6x3.6Canopia milano 10x10/3x3Canopia martinique 10x12/3x3.6