Publicité
Les langues disponibles
Les langues disponibles
Device configuration without remote control
To use the device as a normal weekly chronothermostat with batteries (without Wi-Fi
connection), proceed as follows:
1. When the screen shown in the figure on the side
is displayed, press the keys
NET OFF and press the key
choice within 30 seconds is equivalent to choosing
NET ON)
2. Set date and time. To set the date and time:
Set the seconds
(reset only)
Set the year
To exit the date and time setting:
• press the key
for a long time to return to the home screen
• to change the settings of the summer/winter time change, press the key
for a long time (see "Configuration of the summer/winter time change" on page 60)
NOTE: if the device has been configured without remote control and later
you want to connect it to the home Wi-Fi network, proceed as follows:
1. press the keys
shows
" Conf
2. follow points 3-4-5-6-7-8 of the configuration procedure with remote control
described on page. 48 or 49.
and
to choose
to confirm (a lack of
Set the minutes
Set the month
and
simultaneously for a long time until the display
.
nEt"
- 50 -
OB327000 Chronothermostat User Manual
Set the time
Set the day
Publicité
