Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
7 General
System ................................................. 100 disc DVD-ROM changer
Disc ...................... 12 cm/5-inch CD-ROM disc and DVD-ROM disc
Power requirements ..................... AC 100V/120V/230V (switchable)
Current drain .................................................................... 1.6A(100V)
Weight (with disc magazine, without discs) ...... 34.0 kg (74 lb 15 oz)
Dimensions ................................... 263 (W) x 484 (H) x 588 (D) mm
10-11/32 (W) x 19-1/16 (H) x 23-1/8 (D) in
Operating temperature ............................................. +5°C ~ +35°C
Operating humidity ............................. 5% – 85% (no condensation)
Storage temperature .............................................. –40°C ~ +60°C
7 Functions
Disc storage (12 cm/5-inch discs) ..................................... 100 discs
Removable disc magazines
.................... 2 magazines which hold 50 discs each can be stored.
7 Accessories
Door key (for front door locking) ................................................... 2
SCSl cable ...................................................................................... 4
Power cord .................................................................................... 2
Operating Instructions .................................................................... 1
NOTE:
÷ Specifications and design are subject to possible modifications
without notice, due to improvements.
Notes:
÷ For safety, this unit has been designed so that the door cannot
be opened while the built-in reader is operating.
÷ Since the disc rotates at a high speed in the built-in reader,
vibrations or noise may be generated as a result. Note that this
is not a malfunction and that it will not exert adverse effects on
the performance of the unit.
Maintenance
In order to ensure safe and proper functioning of this unit, we
recommend regular maintenance. Extended service life can
be expected if maintained properly.
Published by Pioneer Electronic Corporation.
Copyright © 1998 Pioneer Electronic Corporation.
All rights reserved.
SCSI connector specifications
50/60 Hz
1.4A(120V)
1.0A(230V)
1) Pin layout of SCSI connectors
Signal name
+41°F ~ +95°F
GROUND
GROUND
GROUND
–40°F ~ +140°F
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NC
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
Notes:
÷ Pin No. 13 is not grounded.
÷ This unit does not supply TERMPWR but accepts an external
suppluy.
÷ The connectors are of the shielded type.
÷ For details on the control commands, refer to the separate
specifications manual.
2) Electrical specifications of SCSI
Output
characteristics
Input
characteristics
Notes:
÷ As the SCSI interface is of the single-end type, it should be
terminated on both ends of the cable.
÷ The maximum recommended length of an SCSI cable is 6 meters
(20 feet) (including internal wiring).
1
+
±
¡
Pin No.
Signal name
1
26
-DB(0)
2
27
-DB(1)
3
28
-DB(2)
4
29
-DB(3)
5
30
-DB(4)
6
31
-DB(5)
7
32
-DB(6)
8
33
-DB(7)
9
34
-DB(P)
10
35
GROUND
11
36
GROUND
12
37
GROUND
13
38
TERMPWR
14
39
GROUND
15
40
GROUND
16
41
-ATN
17
42
GROUND
18
43
-BSY
19
44
-ACK
20
45
-RST
21
46
-MSG
22
47
-SEL
23
48
-C/D
24
49
-REQ
25
50
-I/O
The signals driven by SCSI equipment present
the following output characteristics.
True (LOW):
VOL = 0.0 to 0.4 V DC
IOL = 48 mA (0.5 V DC) max.
False (HIGH): VOH = 2.5 to 5.25 V DC
The signals driven by SCSI equipment present
the following input characteristics.
True (LOW):
VOL = 0.0 to 0.4 V DC
IOL = -0.4 mA (0.4 V DC) max.
False (HIGH): VOH = 2.0 to 5.25 V DC
15
<DRC1091>
En
Publicité
