Sanitas SHD 70 Mode D'emploi page 10

Marking to identify the packaging material.
B
A = Material code, B = Material number:
A
1-7 = Plastics, 20-22 = Paper and cardboard
Separate the product and packaging elements and dispose of them in accordance
with local regulations.
This product satisfies the requirements of the applicable European and national directives.
United Kingdom Conformity Assessed Mark
The products demonstrably meet the requirements of the technical Regulations of the
EAEU.
The textiles used for this device meet the stringent human ecological requirements of
Oeko Tex Standard 100, as verified by Hohenstein Research Institute.
Wash at a maximum tem-
perature of 30 °C, Very gentle
wash
Do not dry-clean
1. Items included in the package
Check that the device packaging has not been tampered with and make sure that all contents are present.
Before use, ensure that there is no visible damage to the device or accessories and that all packaging material
has been removed. If you have any doubts, do not use the device and contact your retailer or the specified
Customer Services address.
1 Heated Throw
1 Control
1 Instructions for use
1.1 Description
1. Mains plug
2. Mains cable
3. Control
4. Indicator lamp
5. Sliding switch for ON/OFF and tempera-
ture settings
6. Plug-in coupling
4
5
3
10
Do not iron
Do not bleach
Do not dry in a tumble dryer
6
1
2