Table des Matières
Publicité
Hint
• When you use a memory card with the camera for the first time, it is
recommended that you format the card on the camera for more stable
performance of the memory card (page 71).
Note
• Do not insert a Memory Stick media into the slot 1. It may cause a malfunction.
To remove the memory card
Open the memory card cover.
Make sure that the access lamp
(page 11) is not lit, and then push
in the memory card once to remove
it.
To record to memory cards in two slots
The slot 1 is used in the default settings. If you do not intend to change
the settings and will only use one memory card, use the slot 1.
By inserting another memory card into the slot 2, you can record the same
images to two memory cards simultaneously or record a different type
of image (still images/movies) to each memory card ([Recording Mode]
under [Rec. Media Settings]) (page
71).
GB
Access lamp
GB
25
Publicité
Table des Matières
