PROLUMIA PRO-CONE 4138010 Serie Manuel D'utilisation page 6

AVAILABLE LIGHT DISTRIBUTIONS
Lens type 1: Round
(Residential areas, parks and parking lots)
Lens type 4: Narrow road (asymmetrical)
(Bicycle paths)
MOUNTING
1. The fi xture can be installed without the need to open it.
2. Insert the included cable into the light pole.
3. Mount the fi xture on the light pole. Fixtures with asymmetrical light distribution should be mounted on the mast
in such a way that the screws point towards the road.
4. Tighten the screws. (17 Nm torque)
5. Connect the cable to the mains power supply.
Max. installation height: 5m
The included cable H05RN-F
(5m, 3x 1.0mm )
2
6
Lens type 2: Asymmetrical
(Residential streets)
Lens type 5: Narrow road (symmetrical)
(Bicycle and pedestrian paths)
Screws
The direction of the screw holes
face the road.
www.prolumia.com
Lens type 3: Symmetrical
(Residential streets and squares)