Blue 32BL600 Instructions D'utilisation page 30

Menu Operation
Configuring the Timer Menu
• Auto Sync.: If set it to ON, the TV will sync the local
clock according to the DTV broadcasting time
automatically.
• Time Zone: Display your time zone
• Daylight Saving Time: Select whether to apply
Daylight Saving Time to the TV.
• Clock: Display either the DTV signal stream time or set
the time manually.
• Sleep Timer: Sleep Timer switches the TV to standby
after a defined period of time. To cancel the Sleep
Timer, set to "Off ".
• Auto Sleep: Select the Auto Sleep time you want. The
TV will enter into standby mode automatically when
there is no operation in set time.
• No Signal Power Off: When set to "On", if there's no
TV signal nor press-button operation, TV will enter
standby status automatically about 5 minutes later.
NOTE:
When the "Auto Sync "is set to "On", Clock option become grey and can't be adjusted.
Configuring the Support Menu
• USB Upgrade: Update the software using the USB memory device. Please be
careful not to disconnect the power or remove the USB drive until updates are
complete.
• Internet Update check: To use network upgrade,
you must have configured your TV to connect to your
network and the TV must be connected to the Internet.
• Software Version: Display current software version
information.
• Installation Guide: This is an installation guide to
help you to setup the TV.
• View End-User License Agreement: Read and
accept/decline the EULA.
• App Settings: Display information about the Netflix.
.
29
Timer
Setting /
Auto Sync.
Time Zone
Berlin GMT+1
Daylight Saving Time
Clock
Sleep Timer
Auto Sleep
No Signal Power Off
Support
Setting /
USB Upgrade
Internet Update Check
Software Version
Installation Guide
View End-User License Agreement
App Settings
On
Manual
00:39
Off
4 Hours
On