Blue 32BL600 Instructions D'utilisation page 13

Basic Operation
Turning on and off the TV
• Turn on the TV
Plug the power cord into a suitable power point, then press the POWER (
on the lower side of the back panel (or on the remote control, making sure to aim it at
the sensor at the front of the TV);
• Turn off the TV
Press the button on the remote control to enter standby mode. To power down the
TV completely, unplugs the power cord from the mains socket.
Do not leave your set in standby mode for long periods of time. If you will not use the
TV for a long time, it is recommended to unplug the set from the mains and aerial.
First Time Setup
If this is the first time you run the TV, the Initial Setup Menu will appear in the picture,
and the items of this menu also exist in other menus, so you are able to change the
values after you set them up.
Tips: Make sure that the antenna or cable TV system connection is made.
•
Set you desired language
Press the ▲/▼ buttons to select the Menu Language, and then press the OK button.
Press the ► button to go to the next step.
•
End-User License Agreement
Select Accept and then press the ► button to accept the EULA and go to the next
step.
Select View addtional details and then press the OK button to read a detailed
EULA.
Press the ◄ button to go to previous step.
•
Select your country
Press the ▲/▼
button.
Press the ► button to go to the next step. Press the ◄ button to go to previous step.
•
Select your time zone.
Press the ▲/▼
Press the ► button to go to the next step. Press the ◄ button to go to previous step.
•
Select your TV environment.
Press the ▲/▼ buttons to select the Home Mode or Store Mode and then press the
OK button.
• Home is the recommended setting to produce the best energy efficiency. If you want
to set Store Mode, a message appears asking you to confirm your choice.
Press the ► button to go to the next step. Press the ◄ button to go to previous step.
•
Network connection (Wired or WIFI)
Press the ▲/▼ buttons to select "Wired" or "Wifi", and wired or wireless network is
enabled respectively. (For more details on connection, please refer to the "Network
settings".)
Select "Skip" and press OK to cancel the network setup and move to next step.
buttons to select the country you are living in, and then press the OK
buttons to select a time zone, and then press the OK button.
12
) button,