Marathon WW194014SS-0108 Mode D'emploi page 4

1. SETTING THE TIME
1. Unscrew the crown from position 1 to position 2.
2. Pull the crown out of position 4.
3. Turn the crown clockwise or counterclockwise to adjust the time.
NOTE: When the crown is in position 4 the second hand stops so that
the time can be synchronized with an accurate time source.
*If your Chronograph watch has stopped, you may wind the crown clockwise
while in position 2. Turn the crown six to ten full turn to restart the movement.
Then set the time by pulling out the crown to position 4. Once the watch is set
onto one's wrist, it will automatically self-wind by the normal motion of the wrist.
ENGLISH