Power Dynamics PDX40 Manuel D'instructions page 4

SETUP
Use either XLR- (option #1) or 6.35mm (option #2) cables to connect the outputs (balanced or unbalanced) to your
loudspeakers, mixer, amplifier, or another device that accepts line-level inputs (make sure that this devices' power is shut off).
NOTE: For stereo operation, make sure left (L) and right (R) outputs are connected to the corresponding left and right inputs.
• Use the supplied power adapter to connect the power input to your power source.
• When using a mixer, make sure all of its connections are secure before powering on.
• Finally, power on your loudspeakers.
4