Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Before you begin
Demonstration mode
The radio has a pre-installed demonstration. To
exit the demonstration, press and release in
sequence the buttons on top of the radio: preset
1, then SLEEP/SNOOZE, then preset 6.
Getting the latest firmware and
information
The radio will automatically alert you for upgrade
if a new firmware is available. You may also go to
www.arinfiniteradio.com for the latest firmware
and user manual for your radio. Follow the
instructions there to download and install files.
Frequently asked questions
For answers to frequently asked questions
(FAQ's), go to www.arinfiniteradio.com.
General controls of AR Wi-Fi Enabler
(for ARIRC205)
Front view
WPS
MODE
WPS
WIRELESS POWER
PRESS
WAN
LAN
Back view
•
•
Antenna
To install the Enabler:
The Enabler can be installed vertically or
WiFi ENABLER
horizontally. Remove the standing brackets for
horizontal installation. Rotate the antenna to
improve signal reception.
WPS
PRESS
WAN port – connect to
your existing access
point, broadband
modem or Ethernet
router/hub/switch
WAN
LAN port – if your modem or
router/hub/switch has only
one LAN port and is
connected to your PC,
disconnect the Ethernet cable
from the modem/router/hub/
switch and connect it to the
Enabler's LAN port.
You can also connect it to your
computer's Ethernet port to
access the Enabler's web-
administration page for
troubleshooting purposes.
Refer to page 31 for more
information.
MODE
WPS
WIRELESS POWER
WiFi ENABLER
WAN
LAN
EN
Power
adapter jack
RESET
LAN
POWER
Reset push
button
13
Publicité
