Allen + Roth WSWS-WU1P Mode D'emploi page 4

ASSEMBLY INSTRUCTIONS
Base Assembly
1. Insert medium cam bolts (EE) into base panel left
(H), base panel right (I) and base panel top (J).
Hardware Used
EE
Medium Cam Bolt
2. Attach base panel back (K) to base panel top (J) using
large wood dowels (FF) and large cam lock (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel top (J) are completely seated.
Hardware Used
DD
Large Cam Lock
FF Large Wood Dowel
3. Attach base panel right (I) to assembly using large
wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel right (I) are completely seated.
Hardware Used
DD
Large Cam Lock
FF Large Wood Dowel
1
J
x 12
H
I
EE
2
K
J
Back Side
x 2
FF DD
x 2
3
DD
J
K FF
x 2
I
x 3
Lowes.com/allenandroth
6
ASSEMBLY INSTRUCTIONS
4. From the back of the assembly, attach base panel right
(I) to base panel back (K) using fl at washers (CC), lock
washers (BB) and bolts (AA). Tighten with Allen wrench
(LL). Secure base panel top (J) with large cam locks (DD).
Hardware Used
AA
Bolt
EE
BB
Lock Washer
CC Flat Washer
DD Large Cam Lock
LL
Allen Wrench
5. Fit base panel back (K) into slot of base panel bottom
(L), then attach base panel bottom (L) to assembly using
large wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel right (I) are completely seated.
Hardware Used
DD
Large Cam Lock
FF Large Wood Dowel
6. Attach base panel left (H) to assembly using large
wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel left (H) are completely seated.
Hardware Used
DD Large Cam Lock
FF Large Wood Dowel
4
K
x 3 Back Side
AA
J
BB
x 3
CC
x 3
x 1
x 1 DD
5
DD
L
K
x 2
x 2
6
H
FF
K
DD
x 4
L
I
x 5
Lowes.com/allenandroth
7
I
FF
J
I
J