eder ELVFS13W-11 Notice D'utilisation page 146

Changing The Program Mid-cycle
A wash cycle can only be changed if it has
been running for a short time otherwise, the
detergent may have already been released and the
dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must
be refilled. To reset the dishwasher, follow the
instructions below:
1. Press the S tart/Pause button to pause the
washing.
2. Press Program button for more than
3 seconds - the program will cancel.
3. Press the Program button to select the
desired program.
4. Press the S tart/Pause button, after
10 seconds, the dishwasher will start.
GB-64