Publicité
Les langues disponibles
Les langues disponibles
Attention
After removing the work top, the screws must be
screwed again under the rear edge of the top
(b). The height will then be reduced to 815 mm,
as scheduled by the International Regulations
(ISO) and the dishwasher will fit perfectly under
the kitchen working top.
TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may
save you from calling for service.
Problem
Dishwasher
doesn't start
GB-31
Possible Causes What To Do
Fuse blown, or
the circuit break
tripped.
Power supply is
not turned on.
Replace fuse or reset
circuit breaker. R emove
any other appliances
sharing the same circuit
with the dishwasher.
Make sure the dishwasher
is turned on and the door
is closed securely. Ma ke
sure the power cord is
properly plugged into the
wall socket.
Publicité
