Samsung RF266 Mode D'emploi page 15

ADJUSTING THE FREEzER DRAWER LEvEL
1. Locate the height-adjuster (
Unscrew the four Phillips screws (
2. Loosen the controller screw(
screwdriver.
3. Find the best level to align the door slope.
After adjustment, first tighten screw (
DA68-01812H.indb 15
Adjustment part
) in the freezer drawer.
1
) slightly to loosen the door.
2
1
) with a Phillips
3
3
) and then screw (
2
3
Example) The slope is about 2mm (0.08inch) as shown below.
Slope
Reference
plane
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
2
).
Freezer Drawer
Setting Up _15
2009.8.10 9:4:17 AM