Publicité
NSTALLATION
Select a location to install the receiver base. Mount
the receiver at least 6˝ above the ground using the
built-in keyhole mount. The outlets must be pointed
downwards to prevent exposure to rain. All outdoor
devices should be plugged into a GFCI electrical
outlet to prevent electrical shock. Consult a qualified
electrician if your outdoor outlet is not of this type or
you're not sure of its type.
OPERATING INSTRUCTIONS
MANUAL MODE: In Manual Mode, pressing the ON
button on the transmitter will turn on power to the
receiver. Power will stay on until you press the OFF
button. Pressing the OFF button will turn power
off to the receiver regardless of any other mode in
operation.
PHOTOCELL MODE: Make sure the sliding mode
switch on the transmitter is in the PHOTOCELL po-
sition. Press the ON button to turn power on to the
receiver. All connected devices will turn on instantly
and will turn off automatically at dawn.
OVERRIDE: You can override any program oper-
ating by pressing the button on the front panel of
the receiver base. Do not hold the button down for
manual override as this will cause the unit to enter
Pairing Mode. If you press the OFF button, the unit
will revert back to the last programmed setting.
Publicité
