Cresta DTX510 Mode D'emploi page 19

In the standard mode, press and hold the key "MODE" for 3 seconds.
•
The display for the YEAR is flashing. Use "
•
Press "MODE" to confirm.
•
The display for the MONTH is now flashing. Use "
•
Press "MODE" to confirm.
•
The display for the DATE is now flashing. Use "
•
Press "MODE" to confirm.
•
The display for the TIME ZONE is flashing. Use "
•
(-12 to +12).
Press "MODE" to confirm.
•
The 12/24 HOUR FORMAT is flashing. Use "
•
Press "MODE" to confirm.
•
The LANGUAGE selection for the display of the WEEKDAYS is now flashing. Use "
•
▼"
"
to select the language (EN - English, GE- German, SP - Spanish,IT - Italian, FR - French,
DU - Dutch, DA - Danish).
The hPa/inHg for the air pressure is now flashing, Use "
•
Press "MODE " to confirm.
•
The display for the HOUR is now flashing. Use "
•
Press "MODE " to confirm.
•
The display for the MINUTES is now flashing. Use "
•
minutes..
Press "MODE " to confirm.
•
INFORMATION:
•
The clock automatically changes from the set-up mode to the time display mode if no
keys are pressed for 20 seconds.
•
Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country located up to 1500km
distance to Frankfurt/Main where the clock can still receive the DCF77 signal but where
the actual time differs from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone
display to 01. The clock is now DCF77 controlled but shows the time is one hour ahead.
DAILY ALARM SET-UP
Press "MODE" to switch from time display to A1 display
•
Press and hold the key "MODE" for 3 seconds, the flashing alarm time are shown
•
The HOUR display of the alarm time is flashing. Use "▲ " and "▼ " to select the hour.
•
Press "MODE" to confirm.
The MINUTES display is now flashing. Use "▲ " and "▼ " to select the minutes,
•
Press "MODE" to confirm.
•
•
The same setting as for A2.
DAILY ALARM ON/OFF
Press "MODE" to switch from the time display to the "A1" or "A2" mode
•
When the A1 or A2 alarm time is showing press " ▲" or " ▼
•
the alarm symbol showing.
Press" ▲" or " ▼
•
"
again to cancel the alarm
"
▲ ▼
" or "
to select the correct year.
"
▲ ▼
" or "
to select the correct month.
"
▲ ▼
" or "
to select the correct date.
"
▲ ▼
" or "
to select the correct time zone
▲ ▼"
" or "
to select
▲
" or "
▲ ▼"
" or "
to select the correct hour.
▲ ▼"
" or "
"
▲
▼"
to select .
to select the correct
to activate the alarm with
" or