Publicité
Les langues disponibles
Les langues disponibles
Settings (con't)
Humidification
80
80
Enable Humidification?
No
Resume Schedule
75
75
Humidify Set Point
30 %
Humidify During...
Heat
Smart Control
Off
Home
Away
Humidity With Fan
Off
65
72
BACK
How to test a humidifier
Adjust the humidify set point up to 'TEST', select Humidify during "Heat/Fan", then turn on a continuous fan speed on
the Fan screen under Settings. This should force the humidifier to run. This setting will last for 30 minutes, where the
maximum setting will return to 4% below the dehumidification set point.
Settings
80
80
Resume Schedule
75
75
Basic
Time
Humidity
Home
Away
Away
Vacation
72
65
BACK
Settings
80
80
Resume Schedule
75
75
Basic
Time
Humidity
Home
Away
Vacation
Away
65
72
BACK
Vacation Settings
80
80
65º
85º
Auto
Resume Schedule
75
75
Start:
02:00 pm
Jan.
29
2018
Home
Away
End:
02:30 pm
Feb.
10
2018
Vacation
Yes
Water
Yes
Heater
72
65
BACK
> Return to Table of Contents
Smart Control – Smart Control is used to reduce or prevent water condensation
on the inside of windows while humidifying in the winter season. The control
monitors indoor and outdoor temperatures and reduces the humidification
percentage according to the Smart Control level chosen by the user. Start out with
44%
44%
the Low setting. If objectionable condensation occurs on windows, choose the
Medium or High setting.
Humidify With Fan – If there is a call to humidify and the fan and heating/
cooling are off, the fan will be forced on to humidify. Select the desired fan speed
from Low to High.
Note: Humidification is only available if a humidifier is installed.
Away Settings (Menu > Settings > Away)
Your system will follow the customized heating, cooling and fan settings when
you place your system into 'Away' mode. The system can be placed into Away
44%
44%
by selecting the Home icon (closed door) on the home screen. Once the system is
Fan
placed into Away mode it will remain until canceled. Simply tap the Away icon
Installer
(open door) to exit Away mode. The system will resume the schedule or return to
the previous settings if a schedule is not being followed. You can also exit Away
by increasing or decreasing the temperature.
Note: If your system is in Cool or Heat when placed into Away mode your system will only manage to
the respective Away set point.
Vacation (Menu > Settings > Vacation)
The Vacation screen allows you to preschedule desired heating, cooling and fan
settings when you are going to be away for an extended time.
44%
44%
Fan
To schedule your vacation, select the time, month, day and year and then use the
up and down arrows to set desired start and end dates.
Installer
Note: You will need to set the vacation end time and date before you can set its start.
Select each set point and fan speed and then use the up down arrows to set to
your desired vacation conditions. We recommend setting the fan speed
to Auto.
44%
44%
EcoNet
Smart Thermostat User Guide
®
15
Publicité
