Tripp-Lite B118-002-HDR Manuel De L'utilisateur page 5

Installation
Cascade Installation
The number of connected monitors can be expanded by cascading up
to three levels of splitters together. Up to 64 displays can be connected
by cascading the splitter from each port in a three-level installation. It is
recommended you use Tripp Lite's P569-XXX-CERT Series Premium High-
Speed HDMI cables.
Note: This feature is only available for B118-002-HDR and B118-004-HDR models.
1. Make sure the power to all the devices you will be connecting is turned
off.
2. Connect the HDMI source to the Input port on the first level splitter.
Note: The length of the HDMI cable connecting the source to the splitter must not
exceed 16 ft. (5 m).
3. Connect an available Output port on the first-level splitter to the HDMI
Input port on a second-level splitter.
Note: The length of the HDMI cable connecting the first- and second-level splitters
must not exceed 10 ft. (3 m).
4. Repeat Step 3 for each additional splitter you wish to add (no more than
3 levels of splitters can be cascaded).
5. Connect an available Output port on your splitter(s) to the display's HDMI
Input port.
Note: The length of the HDMI cable connecting the splitter to the display must not
exceed 16 ft. (5 m).
6. Repeat Step 5 for the remaining Output ports in the installation.
7. Connect the included power supply to each splitter in the installation,
then plug it into a Tripp Lite Surge Protector, Power Distribution Unit (PDU)
or Uninterruptible Power Supply (UPS).
8. Turn on the power to the HDMI source and displays.
19-04-006-933935.indb 5
5
5/7/2019 1:01:04 PM