Publicité
Les langues disponibles
Les langues disponibles
EN
Setting the timing
To comply with the regulations of law in other countries, the timing of
the arrival time can be changed.
With switch 2) the frequency is set to 15 or 30 minutes. For a cycle of
10 minutes, switch 2) is set to 15 minutes and switched to 10 minute
cycle by pressing button 7).
Germany - 30 min., Denmark - 15 min., Sweden - 30 min.,
France - 10 min., Switzerland - 30 min., Austria - 15 min
The device is currently only approved in Germany and Denmark.
Manual insertion of the Parking time
A) Wait until the Park mode is active.
B) Set the favored time by pressing the 5) key and 7) in 30 or 15
minutes intervals of the actual parking time.
Battery change
As soon as the Diode (6) in or of Park mode is flashing, the battery
must be replaced within a week.
Remove the Parking disc from the mounting bracket and change
the battery in the battery compartment (1) When inserting the new
battery, CR2450 doublecheck the correct polarity.
After changing the battery the clock will reset automatically. All time
settings must be made as described in advance.
8
Publicité
