Publicité
Les langues disponibles
Les langues disponibles
Assembly
In advance of placeing the disc on the inner side in the lower right
corner (required by law) doublecheck the fact that the Parking disc
is well visible from the outside and the windshield has a minimum
temperature of +15°C. Optionally the windshield has to be warmed
up to proper temperature with car heating.
A) Before sticking, clean the windscreen thoroughly with the provided
cleaning cloth and dry.
B) Disconnect the magnetic frame from the Parkwächter and remove
the protective film from all four adhesive strips.
C) Press the magnetic frame to the cleaned area and press it with
light pressure for 30 seconds. After 24 hours of drying, attach the
Parkwächter to the magnetic frame.
Warning:
The digital Parking disc must be attached to the windscreen so
that it is approved by law (see chapter: Assembly).
EN
7
Publicité
