Maxvac MEDI 10 Manuel D'instructions page 7

FILTERS AND FILTER
opERATIoN
The MEDI 10 cleans the air in three phases:
During the first phase, the pre-filter is used.
The filter collects larger particles and protects
the HEAPA13/Carbon filter.
The second phase, the H13/Carbon filter is
used. The H13 filter will collect the dust that
is dangerous for people's health and that is
not visible to the naked eye. The Carbon filter
remove pollutants, VOCs and unpleasant
odors from the air.
During the third phase, UV-C light cleans
the air. The UV-C light destroys bacteria and
virus DNA with powerful 100% concealed
ozone-free UV-C lamps.
MEDI 10
FILTER REpLAcEMENT
The pre and main filter can replaced by
removing the top plate. Now you can tilt the
filter housing and easily replace the filters.
H13
Carbon/G4 filter (combined)
CAUTION -
ALWAYS UNPLUG THE MACHINE TO
AVOID DIRECT CONTACT WITH UV-C
LIGHT BEFORE OPENING THE FILTER
HOUSING!
MAX-VAC.COM
G2 filter
7